Official Motorola Moto G7 Power XT1955-7 (Ocean) Stock Rom
CLICK HERE ->>->>->> https://fancli.com/2tuSF1
How to Install Official Motorola Moto G7 Power XT1955-7 (Ocean) Stock Rom
If you want to restore your Motorola Moto G7 Power XT1955-7 (Ocean) to its original factory settings, or if you need to fix some software issues, you can install the official stock rom on your device. The stock rom is the official firmware that comes preloaded on your phone, and it contains all the drivers, apps, and features that Motorola intended for your device. Installing the stock rom can also help you unbrick your phone if it is stuck in a bootloop, or if you have flashed a custom rom that is not compatible with your device.
In this guide, we will show you how to download and install the official Motorola Moto G7 Power XT1955-7 (Ocean) stock rom using a simple and easy method. You will need a Windows PC, a USB cable, and some basic knowledge of flashing firmware. Before you proceed, make sure to backup your important data, as this process will erase everything on your phone. Also, make sure to charge your phone to at least 50% battery level to avoid any interruptions.
Steps to Install Official Motorola Moto G7 Power XT1955-7 (Ocean) Stock Rom
Download the official Motorola Moto G7 Power XT1955-7 (Ocean) stock rom from here. The file name should be something like \"XT1955-7_OCEAN_RETEU_10_QPOS30.52-29-3_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip\". Extract the zip file to a folder on your PC.
Download and install the Motorola USB drivers from here. This will allow your PC to recognize your phone when connected via USB.
Download and install the Motorola Fastboot tool from here. This is a command-line tool that will help you flash the stock rom on your phone. Extract the zip file to a folder on your PC.
Power off your phone and boot it into fastboot mode. To do this, press and hold the Volume Down and Power buttons together for a few seconds until you see a black screen with some text. Connect your phone to your PC via USB.
Open a command prompt window on your PC and navigate to the folder where you extracted the Motorola Fastboot tool. To do this, press the Windows key + R on your keyboard, type \"cmd\" and hit enter. Then type \"cd\" followed by the path of the folder where you extracted the Motorola Fastboot tool. For example, if you extracted it to C:\\MotorolaFastboot, type \"cd C:\\MotorolaFastboot\" and hit enter.
Type \"fastboot devices\" and hit enter. This will show you a list of devices connected to your PC in fastboot mode. You should see your phone's serial number. If not, make sure you have installed the Motorola USB drivers correctly and try again.
Type \"fastboot flash partition gpt.bin\" and hit enter. This will flash the partition table on your phone. Wait for it to finish.
Type \"fastboot flash bootloader bootloader.img\" and hit enter. This will flash the bootloader on your phone. Wait for it to finish.
Type \"fastboot reboot-bootloader\" and hit enter. This will reboot your phone into fastboot mode again.
Type \"fastboot flash logo logo.bin\" and hit enter. This will flash the logo on your phone. Wait for it to finish.
Type \"fastboot flash boot boot.img\" and hit enter. This will flash the boot image on your phone. Wait for it to finish.
Type \"fastboot flash recovery recovery.img\" and hit enter. This will flash the recovery image on your phone. Wait for it to finish.
Type \"fastboot flash dsp adspso.bin\" and hit enter. This will flash the dsp image on your phone. Wait for it to finish.
Type \"fastboot flash oem ec8f644aee